Solar Panel Installers and Contractors for Wisconsin
Site Sponsors
Links
WA Solar Panel Questions
Frequently Asked Questions About Solar Panels in Wisconsin
How do solar cells generate electricity?
Photovoltaic or PV for short can be thought of as a direct current (DC) generator powered by the sun. When light photons of sufficient energy strike a solar cell, they knock electrons free in the silicon crystal structure forcing them through an external circuit (battery, inverter or direct DC load), and then returning them to the other side of the solar cell to start the process all over again. The voltage output from a single crystalline solar cell is about 0.5V with an amperage output that is directly proportional to the cell’s surface area (approximately 7A for a 6 inch square multi-crystalline solar cell).Typically 30-36 cells are wired in series (+ to -) in each solar module. This produces a solar module with a 12V nominal output (~17V at peak power) that can then be wired in series and/or parallel with other solar modules to form a complete solar array.
Will solar power work in my area?
Solar is universal and will work virtually anywhere, however some locations are better than others. Irradiance is a measure of the sun’s power available at the surface of the earth and it peaks at about 1000 watts per square meter.
With typical crystalline solar cell efficiencies around 14-20%, that means we can expect to generate about 140-200W per square meter of solar cells placed in full sun. Insolation is a measure of the available energy from the sun and is expressed in terms of "full sun hours" (i.e. 4 full sun hours = 4 hours of sunlight at an irradiance level of 1000 watts per square meter). Obviously different parts of the world receive more sunlight than others,so they will have more“full sun hours”per day.The solar insolation zone map will give you a general idea of the full sun hours per day during the summer for your location.
